***
Y-TGC horn insert Banana TGC-XS TGCS TGC-1 TGC-2 TGC-3 TGC-4
Specification
- Detail
- Parameters
- Review
Model/Specification | L | W | H | CL | GH | RW | RL | M | SL | Maximum weight of injection molded products | ||
low viscosity | medium viscosity | high viscosity | ||||||||||
Y-TGC/XS | 10 | 5 | 12 | 8.5 | 1 | 25 | 3.2 | M4 | 5 | -5g | -4g | -3g |
S | 15 | 6 | 18 | 13.3 | 2 | 25 | A | 8 | -12g | -7g | -5g | |
1 | 18 | 8 | 22 | 16 | 2 | 4 | 5.2 | M5 | 9 | -35g | -25g | -15g |
2 | 25 | 10 | 22 | 22.1 | 3 | 6 | 6.5 | 8 | -120g | -75g | -50g | |
3 | 30 | 12 | 27 | 26.9 | 5 | 8 | 7 | M6 | 9 8 | -1000g | -500g | -300g |
4 | 45 | 12 | 36 | 412 | 10 | 8 | 9.6 | |||||
Remark:
Low viscosity: PPI PEI PSI SB;
Medium viscosity: ABSI PBT I POMI TPEI PAI PET I PMMAI SAN;
High viscosity: PCI PVCI PESI PPOI PPS
Specification | TPE TPU, TPA.... | PE. PP PET. PBT._. | ABS, ASA.PC/ABS. HI-PC. PA, POM. SB.... | PA + GE PC. SAN, PVC- U,PS, PMMA, PEI.... |
A | A | A | A | |
XS | 12~16 | 13~20 | 16~23 | 22-29 |
S | 16~21 | 18-25 | 21-28 | 27-34 |
1 | 21~26 | 26-34 | 31-39 | 36-45 |
2 | 28~33 | 31-89 | 36-44 | 41~50 |
3 | 33-38 | 38~48 | 43-53 | 48-58 |
4 | 48-53 | 53--63 | 58-66 | - |
T wall thickness of plastic products;
The crater height is less than 0.5 times the product wall thickness
价格
***
Stock
5000