model | cup head | Material | heat treatment | hardness |
Y13A | Header | SKD61 | (Surface hard) nitriding treatment | Surface HV900/Internal HRC35~40 |
outer diameter | inside diameter | cup head | S | length L | |||||||||
P | V | H | T | 140 | 150 | 160 | 170 | 180 | 190 | 200 | 210 | 220 | |
4 | 1.7 | 8 | 6 | 15 | 。 | . | . | . | 。 | 。 | 。 | 。 | 。 |
2 | 35 | . | . | . | . | . | . | . | 。 | 。 | |||
4.5 | 2.5 | 。 | . | . | . | 。 | 。 | 。 | 。 | 。 | |||
5 | 9 | . | . | . | . | . | . | . | 。 | 。 | |||
5.5 | 10 | . | 。 | 。 | 。 | . | 。 | 。 | 。 | 。 | |||
6 | 。 | 。 | 。 | . | . | . | 。 | . | . | ||||
5 | 3 | 9 | . | . | . | 。 | . | . | 。 | 。 | 。 |
Diameter of cylinder needle | Cup head of cylinder needle | |
V | HP | TP |
1.7 | 6 | 4 |
2 | ||
2.5 | ||
3 |
Remark:
The specified length cannot be cut short by more than 5mm;
If the overall length of the pin is not specified (LP), the total length of the pin (L) plus 100mm will be shipped.